# Changelog

## v3.2.0

add

`update_event`

keyword argument to enable/disable auto-update on panning for plots created with`MatplotlibBackend`

,`PlotlyBackend`

and`BokehBackend`

. By default, this functionality is turned off,`update_event=False`

.Improved the logic handling the creation of sliders on interactive-widget plots. Consider this code:

`params = {k: (1, 0, 5, formatter, label)`

. It now works both with ipywidgets as well as panel. Previously,`formatter`

was not supported by`ipywidgets`

.Added

`arrows=`

keyword argument to`nichols`

and`plot_nichols`

.Added

`show_minus_one=`

keyword argument to`mcircles`

.Implemented renderers for Bokeh in order to deal with control system plotting.

Improved tooltips in

`BokehBackend`

.Breaking: refactoring of

`NicholsLineSeries`

. Previously, it returned data about the open-loop transfer function. Now, it also returns data about the closed-loop transfer function, which can be used on tooltips.

## v3.1.1

Fix incorrect behavior of “arrow_3d”.

## v3.1.0

User can now specify an existing figure over which symbolic expressions will be plotted. Just use the

`ax=`

or`fig=`

keyword argument.Added

`arrow_3d`

to`spb.graphics.vectors`

in order to plot a single arrow in a three-dimensional space.Enhanced capabilities of line plots with the

`steps`

keyword argument. Possible values are`"pre", "post", "mid"`

, mimicking Matplotlib’s`step`

function.New features on the

`spb.graphics.control`

sub-module:It now depends on the python-control module. This dependency allows the implementation of new plotting functions and to seamlessly deal with transfer functions from

`sympy`

,`control`

and`scipy.signal`

, supporting both continous-time and discrete-time systems.Added support for MIMO systems.

Created

`sgrid, zgrid, ngrid, mcircles`

functions to easily create grids for control system plots. Appropriate keyword arguments have been created on all major plot functions in order to activate these grids.Added

`plot_root_locus`

to the control submodule.`plot_bode`

now auto-computes an appropriate frequency range.Removed the transfer function’s Latex representation from the title of plots related to control systems. This decision is motivated from practical experience, where most of the transfer functions have floating point coefficients, which makes their Latex representation too big to fit into the small width of a plot.

Refactoring of the

`series.py`

sub-module:code has been re-organized to make extensibility easier and slightly improve performance. In particular, the mixin class

`CommonUniformEvaluation`

has been introduced, which handles all the machinery necessary to evaluate symbolic expressions. Series classes may or may not inherit from it.`CommonUniformEvaluation`

allows for a better separation of scopes: data series that don’t need that code are faster to instantiate.Breaking: refactoring of

`NyquistLineSeries`

in order to use the`control`

module. In particular, the`get_data`

method now returns many more arrays.Breaking: removed attribute

`use_quiver_solid_color`

from`Vector2DSeries`

.

Fixed bug with labels of 2D vector fields.

## v3.0.1

Added new coloring option to

`domain_coloring`

. Setting`coloring="k+log"`

will apply a logarithm to the magnitude of the complex function. This improves the visibility of zeros in complex functions that have very steep poles.Added the

`hyper`

function to the list of functions to be evaluated with real numbers. This avoids unexpected errors.Set

`unwrap=True`

as defaul option for`plot_bode`

: this helps to get a continous phase plot.Enabled

`plot_bode`

to deal with system containing time delays.Enabled panel’s interactive applications to render Latex labels on widgets when served on a new window.

Fixed bug with evaluation of user-defined python’s function.

Fixed bug with labels of

`plot_implicit`

.Fixed bug with labels of

`plot_piecewise`

.Fixed bug with difficult to render labels on Matplotlib. If Matplotlib detects an error while parsing legend’s entries, the plot won’t show the legend.

Fixed bug with

`plot_bode_phase`

when`phase_units="deg"`

and`unwrap=True`

.Added settings for bode plot’s

`phase_unit`

and`freq_unit`

to the`defaults`

submodule.Fixed bug with title of Bode plots.

Fixed title of

`plot_step_response`

.Implemented workaround for holoviz’s Panel interactive applications to be able to work with a currently open bug.

## v3.0.0

Introducing the

**graphics module**, which aims to solve the following problems about ordinary plotting function (whose name’s start with`plot_`

):Some functions perform too many tasks, making them difficult and confusing to use.

The documentation is difficult to maintain because many keywords arguments are repeated on all plotting functions.

The procedures to combine multiple plots together is far from ideal.

The

*graphics module*implements new functions into appropriate submodules. Each function solves a very specific task and is able to plot only one symbolic expression. Each function returns a list containing one or more data series, depending on the required visualization. In order to render the data series on the screen, they must be passed into the`graphics`

function. Plenty of examples about its usage are available on the documentation.Added

`arrow_2d`

to`spb.graphics.vectors`

in order to plot a single arrow in a two-dimensional space.Reorganized old plotting functions (whose name’s start with

`plot_`

) into a new submodule:`spb.plot_functions`

. In particular:Deprecated

`spb.vectors`

. Its content is now into`spb.plot_functions.vectors`

.Deprecated

`spb.functions`

. Its content is now into`spb.plot_functions.functions_2d`

and`spb.plot_functions.functions_3d`

.Deprecated

`spb.control`

. Its content is now into`spb.plot_functions.control`

.Deprecated

`spb.ccomplex.complex`

. Its content is now into`spb.plot_functions.complex_analysis`

.Deprecated

`spb.ccomplex.wegert`

. Its content is now into`spb.wegert`

.

Under the hood, many of these plotting functions now uses the

*graphics module*.Bug fix on

`MatplotlibBackend`

about updating y-axis limits. Thanks to Chrillebon for the fix.Improved performance of the evaluation with

`adaptive=False`

(the default one). Removed`np.vectorize`

when the evaluation module is NumPy/Scipy in order to take full advantage of Numpy’s vectorized operations.Keyword argument

`is_point`

now has an alias:`scatter`

. Setting`scatter=True`

will render a sequence of points as a scatter rather than a line.Improved warning messages to provide more useful information.

Fixed import-related bug with older versions of SymPy.

## v2.4.3

Bug fix: set axis scales only if the appropriate keyword arguments are provided. This allows to create symbolic plots with categorical axis.

Fixed deprecation warning of one example using Holoviz panel and Bokeh formatters.

Added new tutorial to documentation.

Added the

`unwrap`

keyword argument to`plot_bode`

in order to get a continous phase plot.

## v2.4.2

Fixed bug with renderers and the

`extend`

and`append`

methods of plot objects.

## v2.4.1

Fixed bug with conda package.

## v2.4.0

Enabled interactive-widgets

`plotgrid`

. In particular, this allows to create interactive widget plots with`plot_bode`

and`plot_riemann_sphere`

.Enabled support for plotting applied undefined functions.

Implemented parametric text for titles and axis labels.

Implemented the

`exclude`

keyword argument for`plot`

and`plot_parametric`

. It accepts a list of values at which a discontinuity will be introduced. This complementes the poles detection algorithm.Bug fixes

fixed bug with axis labels of

`plot_real_imag`

when creating contour plots.fixed bug with colorbar label of 3d plots with lambda functions.

## v2.3.0

Improvements to the

`plot`

function:Implemented reversed x-axis. Usually, a plot range is given with the form

`(symbol, min_val, max_val)`

, with`min_val`

on the left of the plot. If a range is given with`(symbol, max_val, min_val)`

, then the x-axis will be reversed.The

`plot`

function is now able to show vertical lines at discontinuities when`detect_poles="symbolic"`

, at least for simple symbolic expressions.

Introducing the

`Renderer`

class. Up to version 2.2.0, all the rendering logic was located into each backend class, making it very difficult if not impossible to extend the capabilities for final users. From this version, each data series is going to be paired with an instance of`Renderer`

: users can create new data series and renderers. Then, by informing the backend of their existance, users can create new plot functions or modify the rendering of the old ones.Introducing the control module, which contains plotting functions for some of the common plots used in control system. This is an improved version of what is currently present on SymPy (version 1.12), because:

it allows to plot multiple systems simultaneously, making it easier to compare different transfer functions.

it works both on Matplotlib, Plotly and Bokeh.

it allows to create interactive-widgets plots, allowing the study of parametric systems.

Thanks to all SymPy developers that worked on the

`sympy.physics.control.control_plots`

module.Further, it includes

`plot_nyquist`

and`plot_nichols`

, which currently only works with Matplotlib. Their underlying rendering logic comes from the python-control package. Huge thanks to all the`python-control`

developers that worked on those functions.Upgrading dependency of Holoviz’s Panel to version greater or equal than 1.0.0.

Bug fixes:

complex surfaces can now be plotted with

`plot_contour`

.custom rendering keyword arguments can be passed to

`plot_geometry`

.

## v2.2.0

Improved complex domain coloring and added

`plot_riemann_sphere`

.Added

`imagegrid`

keyword argument to`plotgrid`

.Enabled support for plotting indexed objects.

Implemented

`colorbar`

keyword argument to show/hide colorbar.Implemented

`show_in_legend`

keyword argument to show/hide a specific series on the legend of a plot.Improved logic about legend.

Fixed bug with

`PlotlyBackend`

when creating 3D analytic landscapes.

## v2.1.0

Improved

`plot_implicit`

:implemented the

`color`

keyword argument, to set the color of line or region being plotted.implemented the

`border_color`

keyword argument: this will add a new data series to represent a limiting border when plotting inequalities (`>, >=, <, <=`

).reduced the number of discretization points from 1000 to 100. Thanks to improvements to the backend and data generation, same quality can be achieved much more efficiently.

Improved

`plot_complex`

and domain coloring plots:User can now set a different colormap.

Added new coloring schemes.

User can change the label of the colorbar.

Bug fixes on

`MatplotlibBackend`

:fixed bad behavior when plotting filled geometries with interactive widgets.

fixed missing legend entries when combining different types of plots.

Bug fixes on

`K3DBackend`

:it is now possible to plot 3D quivers with custom colormaps.

fixed color bar visibility when plotting 3D complex plots.

`MatplotlibBackend`

and`PlotlyBackend`

are now able to visualize legend entries for 3D surface plots using solid colors.

## v2.0.2

Bug fix: included static files necessary for serving interactive application on a new browser window.

Improved documentation.

## v2.0.1

Improved import statements on

`spb.interactive.ipywidgets`

: now, this module can be used even when only matplotlib and ipywidgets are installed.

## v2.0.0

If you are upgrading from a previous version, you should run the following code to load the new configuration settings:

```
from spb.defaults import reset
reset()
```

Breaking changes:

Refactoring of

`*Series`

classes. All`*InteractiveSeries`

classes have been removed. The interactive functionalities have been integrated on regular`*Series`

. This greatly simplifies the code base, meaning bug fixes should take less time to implement.Refactoring of

`iplot`

to take into account the aforementioned changes. In particular, interactive widget plots are now tighly integrated into the usual plotting functions. This improves user experience and simplifies the code base.The

`spb.interactive.create_series`

function has been removed.

Changed the default evaluation algorithm to a uniform sampling strategy, instead of the adaptive algorithm. The latter is still available, just set

`adaptive=True`

on the plotting functions that support it. The motivation behind this change is that the adaptive algorithm is usually much slower to produce comparable results: by default, the uniform sampling strategy uses 1000 discretization points over the specified range (users can increase it or decrease it), which is usually enough to smoothly capture the function.It also simplifies the dependencies of the module: now, the adaptive algorithm is not required by the plotting module to successfully visualize symbolic expressions, hence it is not installed. If users need the adaptive algorithm, they’ll have to follow the adaptive module installation instructions.

Improved support for plotting summations.

Implemented wireframe lines for 3D complex plots.

Interactive widget plots.

Users can now chose the interactive module to be used:

`ipywidgets`

: new in this release. It is the default one.`panel`

: the same, old one.

Please, read the documentation about the interactive sub-module to learn more about them, and how to chose one or the other.

Implemented the

`template`

keyword argument for interactive widget plots with Holoviz’s Panel and`servable=True`

: user can further customize the layout of the web application, or can provide their own Panel’s templates.The module is now fully interactive. Thanks to the

`prange`

class, it is possible to specify parametric ranges. Explore the examples in the module documentation to find out how to use it.

`color_func`

now support symbolic expressions.`line_color`

and`surface_color`

are now deprecated in favor of`color_func`

.`plot_implicit`

:now it supports interactive-widget plots, when

`adaptive=False`

.not it support

`rendering_kw`

for plots created with`adaptive=True`

.improved logic dealing with legends. When plotting multiple regions, rectangles will be visible on the legend. When plotting multiple lines, lines will be visible on the legend.

Removed

`tutorials`

folder containing Jupyter notebooks. The documentation contains plently of examples: the notebooks were just reduntant and difficult to maintain.`MatplotlibBackend`

: implemented support for`ipywidgets`

.`PlotlyBackend`

:fixed bug with interactive update of lines.

implemented support for

`ipywidgets`

.

`BokehBackend`

:improved support for Bokeh 3.0.

removed

`update_event`

because it became a redundant feature now that the module is fully parametric.

`plot_contour`

: added the`clabels`

keyword argument to show/hide contour labels.Documentation is now able to show interactive widget plots with K3D-Jupyter.

conda package is now built and made available through the conda-forge channel. This greatly simplify the workflow and should allow an easier installation with conda.

## v1.6.7

Fixed bugs related to evaluation with complex numbers and parameters. Thanks to Michele Ceccacci for the fix!

## v1.6.6

Fixed bug with

`PlaneSeries`

’s data generation. Thanks to Crillebon for the fix!

## v1.6.5

Refinements and bug correction on

`plot_polar`

: now it supports both cartesian and polar axis. Set`polar_axis=True`

to enable polar axis.Added polar axis support to

`plot_contour`

with`MatplotlibBackend`

.3D complex plots uses an auto aspect ratio by default.

## v1.6.4

`MatplotlibBackend`

:improved

`aspect`

logic. It is now able to support the new values for 3D plots for Matplotlib>=3.6.0.exposed the

`ax`

attribute to easily retrieve the plot axis.

Added

`camera`

keyword arguments to backends in order to set the 3D view position. Refer to each backend documentation to get more information about its usage.improved documentation.

## v1.6.3

Fixed bug with

`plot_geometry`

and 3D geometric entities.Added tutorial about combining plots together.

## v1.6.2

Added

`plot3d_list`

function to plot list of coordinates on 3D space.Changed value to default setting:

`cfg["matplotlib"]["show_minor_grid"]=False`

. Set it to`True`

in order to visualize minor grid lines.Improved documentation.

Enabled

`color_func`

keyword argument on`plot_vector`

.`PlotlyBackend`

:if the number of points of a line is greater than some threshold, the backend will switch to

`go.Scattergl`

. This improves performance.Fixed bug with interactive widget contour plot and update of colorbar.

`MatplotlibBackend`

can now combine 3d plots with contour plots.Fixed bug with addition of interactive plots.

## v1.6.1

Improvements to documentation. In particular, ReadTheDocs now shows pictures generated with

`PlotlyBackend`

,`K3DBackend`

as well as interactive plots with widgets.Default settings:

Changed

`cgf["interactive"]["theme"]`

to`"light"`

: interactive plots served on a new browser window will use a light theme.Changed

`cgf["bokeh"]["update_event"]`

to`False`

: Bokeh won’t update the plot with new data as dragging or zooming operations are performed.Added new option

`cgf["k3d"]["camera_mode"]`

.

Improvements to

`MatplotlibBackend`

:Added label capability to

`plot_implicit`

.`show()`

method now accepts keyword arguments. This is useful to detach the plot from a non-interactive console.

Added

`dots`

keyword argument to`plot_piecewise`

to choose wheter to show circular markers on endpoints.Fixed bug with plotting 3D vectors.

## v1.6.0

Added new plotting functions:

`plot3d_revolution`

to create surface of revolution.`plot_parametric_region`

, still in development.

`MatplotlibBackend`

:Fixed bug with colormaps and normalization.

Improved update speed when dealing with parametric domain coloring plots.

Improved

`zlim`

support on`K3DBackend`

for interactive widget plots.Fixed bug with parametric interactive widget plots and

`PlotlyBackend`

: the update speed is now decent.Series:

Moved

`LineOver1DRangeSeries._detect_poles`

to`_detect_poles_helper`

.`plot_complex`

and`plot_real_imag`

: the input expression is no longer wrapped by symbolic`re()`

or`im()`

. Instead, the necessary processing is done on the series after the complex function has been evaluated. This improves performance.

`Parametric2DLineSeries`

now support`detect_poles`

.Implemented support for

`color_func`

keyword argument on`plot_list`

and`plot_complex_list`

.Added

`extras_require`

to`setup.py`

:by default,

`pip install sympy_plot_backends`

will install only the necessary requirements to get non-interactive plotting to work with Matplotlib.use

`pip install sympy_plot_backends[all]`

to install all other packages: panel, bokeh, plotly, k3d, vtk, …

Documentation:

Improved examples.

Added examples with

`PlotlyBackend`

.

## v1.5.0

Implemented the

`plot3d_spherical`

function to plot functions in spherical coordinates.Added the

`wireframe`

option to`plot3d`

,`plot3d_parametric_surface`

and`plot3d_spherical`

to add grid lines over the surface.Fixed bug with

`plot3d`

and`plot_contour`

when dealing with instances of`BaseScalar`

.Added

`normalize`

keyword argument to`plot_vector`

and`plot_complex_vector`

to visualize quivers with unit length.Improve documentation of

`plot_vector`

and`plot_complex_vector`

.Improved test coverage on complex and vector plotting functions.

Improvements on

`PlotlyBackend`

:it is now be able to plot more than 14 2d/3d parametric lines when

`use_cm=False`

.improved logic to show colorbars on 3D surface plots.

added support for custom aspect ratio on 3D plots.

Improved support for

`xlim`

,`ylim`

,`zlim`

on`K3DBackend`

.Series:

Fixed bug with uniform evaluation while plotting numerical functions.

Fixed bug with

`color_func`

.Added transformation keyword arguments

`tx, ty, tz`

to parametric series.

Breaks:

Inside

`plot_parametric`

and`plot3d_parametric_line`

, the`tz`

keyword argument has been renamed to`tp`

.Removed Mayavi from setup dependencies. Mayavi is difficult to install: can’t afford the time it requires for proper setup and testing.

`MayaviBackend`

is still available to be used “as is”.

## v1.4.0

Reintroduced

`MayaviBackend`

to plot 3D symbolic expressions with Mayavi. Note that interactive widgets are still not supported by this backend.`plot_contour`

is now able to create filled contours or line contours on backends that supports such distinction. Set the`is_filled`

keyword argument to choose the behaviour.Implemented interactive widget support for

`plot_list`

.Implemented back-compatibility-related features with SymPy.

Fixed bugs with

`PlaneSeries`

:Data generation for vertical planes is now fixed.

`K3DBackend`

is now able to plot this series.Similar to other 3D surfaces, planes will be plotted with a solid color.

Fixed bug with

`Vector3DSeries`

: the discretized volume is now created with Numpy’s`meshgrid`

with`indexing='ij'`

. This improves the generation of 3D streamlines.Fixed bug with

`plot3d`

and`plot_contour`

: when`params`

is provided the specified backend will be instantiated.Fixed bug with

`K3DBackend`

and`plot3d_implicit`

.

## v1.3.0

Added support for plotting numerical vectorized functions. Many of the plotting functions exposed by this module are now able to deal with both symbolic expressions as well as numerical functions. This extends the scope of this module, as it is possible to use it directly with numpy and lambda functions. For example, the following is now supported:

import numpy as np plot(lambda t: np.cos(x) * np.exp(-x / 5), ("t", 0, 10))

Added support for vector from the

`sympy.physics.mechanics`

module in the`plot_vector`

function.Implemented keyword argument validator: if a user writes a misspelled keyword arguments, a warning message will be raised showing one possible alternative.

## v1.2.1

Added

`used_by_default`

inside default options for adaptive algorithm. This let the user decide wheter to use adaptive algorithm or uniform meshing by default for line plots.Fix the axis labels for the

`plot_complex_vector`

function.Improved a few examples in the docstring of

`plot_vector`

and`plot_complex_vector`

.Fixed bug with interactive update of

`plot_vector`

inside`MatplotlibBackend`

.Improvements to the code in preparation for merging this module into Sympy:

Small refactoring about the label generation: previously, the string and latex representations were generated at different times and in different functions. Now, they are generated simultaneously inside the

`__init__`

method of a data series.Changes in names of functions that are meant to remain private:

`adaptive_eval`

->`_adaptive_eval`

.`_uniform_eval`

->`_uniform_eval_helper`

`uniform_eval`

->`_uniform_eval`

`_correct_size`

->`_correct_shape`

`get_points`

->`_get_points`

## v1.2.0

Replaced the

`line_kw`

,`surface_kw`

,`image_kw`

,`fill_kw`

keyword arguments with`rendering_kw`

. This simplifies the usage between different plotting functions.Plot functions now accepts a new argument:

`rendering_kw`

, a dictionary of options that will be passed directly to the backend to customize the appearance. In particular:Possibility to plot and customize multiple expressions with a single function call. For example, for line plots:

plot( (expr1, range1 [opt], label1 [opt], rendering_kw1 [opt]), (expr2, range2 [opt], label2 [opt], rendering_kw2 [opt]), **kwargs )

Possibility to achieve the same result using the

`label`

and`rendering_kw`

keyword arguments by providing lists of elements (one element for each expression). For example, for line plots:plot(expr1, expr2, range [opt], label=["label1", "label2"], rendering_kw=[dict(...), dict(...)], **kwargs )

Interactive submodule:

Fixed bug with

`spb.interactive.create_widgets`

.Integration of the interactive-widget plot

`iplot`

into the most important plotting functions. To activate the interactive-widget plot users need to provide the`params`

dictionary to the plotting function. For example, to create a line interactive-widget plot:plot(cos(u * x), (x, -5, 5), params={u: (1, 0, 2)})

Series:

Fixed a bug with line series when plotting complex-related function with

`adaptive=False`

.Fixed bug with

`lambdify`

and`modules="sympy"`

.Fixed bug with the number of discretization points of vector series.

Enabled support for Python’s built-in

`sum()`

function, which can now be used to combine multiple plots.

Backends:

Fixed a bug with

`MatplotlibBackend`

and string-valued color maps.Fixed a bug with

`BokehBackend`

about the update of quivers color when using`iplot`

.

Updated tutorials and documentation.

## v1.1.7

Fixed bug with

`plot_complex_list`

.Added new tutorial about singularity-dections.

## v1.1.6

Fixed bug with

`label`

keyword argument.Added error message to

`plot3d`

.Updated documentation.

## v1.1.5

Implemented

`line_color`

and`surface_color`

: this plotting module should now be back-compatible with the current`sympy.plotting`

.

## v1.1.4

`color_func`

is back-compatible with`sympy.plotting`

’s`line_color`

and`surface_color`

.

## v1.1.3

Added

`color_func`

support to parametric line series.Improved docstring.

## v1.1.2

iplot:

Added

`servable`

keyword argument:`servable=True`

will serves the application to a new browser windows,Added

`name`

keyword argument: if used with`servable=True`

it will add a title to the interactive application.

Default settings:

Added

`servable`

and`theme`

to`interactive`

section.

Fixed a bug when plotting lines with

`BokehBackend`

.Improved the way of setting the number of discretization points:

`n`

can now be a two (or three) elements tuple, which will override`n1`

and`n2`

.It is now possible to pass a float number of discretization points, for example

`n=1e04`

.added

`label`

keyword argument to plot functions.

## v1.1.1

Added

`color_func`

keyword argument to:plot to apply custom coloring to lines.

- plot3d and plot3d_parametric_surface to apply custom coloring to 3D
surfaces.

to accomodate

`color_func`

,`ParametricSurfaceSeries.get_data()`

now returns 5 elements instead of 3.

Added plot range to default settings.

Implemented a custom printer for interval math to be used inside

`ImplicitSeries`

.Added

`plot3d_implicit`

to visualize implicit surfaces.`MatplotlibBackend`

now uses default colorloop from`plt.rcParams['axes.prop_cycle']`

.

## v1.1.0

`polar_plot`

:a polar chart will be generated if a backend support such feature, otherwise the backend will apply a polar transformation and plot a cartesian chart.

`iplot`

changes the keyword argument to request a 2D polar chart. Use`is_polar=True`

instead of`polar=True`

.

`plot3d`

:Setting

`is_polar=True`

enables polar discretization.

3d vector plots:

Keyword argument

`slice`

can now acccept instances of surface-related series (as well as surface interactive series).Improved

`PlotlyBackend`

and`K3DBackend`

support for 3D vector-quiver interactive series.

Default setting:

Added adaptive

`"goal"`

.Added

`use_cm`

for 3D plots.

Added

`tx, ty, tz`

keyword arguments. Now it is possible to apply transformation functions to the numerical data, for example converting the domain of a function from radians to degrees.Added Latex support and a the use_latex keyword argument to toggle on/off the use of latex labels. Plot functions will use latex labels on the axis by default, if the backend supports such feature. The behaviour can be changed on the default settings.

Fixed bug within

`iplot`

and`K3DBackend`

when setting`use_cm=False`

.`iplot`

parameters can accept symbolic numerical values (of type`Integer`

,`Float`

,`Rational`

).Removed

`plot_data`

module.

## v1.0.4

Bug fix for plotting real/imag of complex functions.

## v1.0.3

Deprecated

`get_plot_data`

function.Exposed

`create_series`

function from the`spb.interactive`

module.Removed dependency on sympy.plotting.experimental_lambdify. Now this plotting module relies only on lambdify.

Improved testing of

`plot_implicit`

.Added quickstart tutorials to ReadTheDocs.

## v1.0.2

Added backend’s aliases into

`__init__.py`

.Added example to the

`plot`

function.Improved docstring and examples of

`plot_implicit`

.Fixed bug with

`PlotlyBackend`

in which axis labels were not visible.Added

`throttled`

to default settings of interactive.Added

`grid`

to defaults settings of all backends.

## v1.0.1

Exiting development status Beta

Updated

`K3DBackend`

documentation.Updated tutorial

## v1.0.0

Data series:

Integrated adaptive module with SymPy Plotting Backends.

Implemented adaptive algorithm for 3D parametric lines and 3D surfaces.

added

`adaptive_goal`

and`loss_fn`

keyword arguments to control the behaviour of adaptive algorithm.

Improved support for integer discretization.

Integrated

`lambdify`

into data series to generate numerical data.partially removed dependency

`sympy.plotting.experimental_lambdify`

. Only`ImplicitSeries`

still uses it for its adaptive implementation with interval arithmetic.Added

`modules`

keyword argument to data series in order to choose the`lambdify`

module (except`ImplicitSeries`

).

Line series now implements the

`_detect_poles`

algorithm.Added

`rendering_kw`

attribute to all data series.Refactoring of

`InteractiveSeries`

:`InteractiveSeries`

is now a base class.Implemented several child classes to deal with specific tasks.

Removed

`update_data`

method.Added

`params`

attribute as a property.Fixed the instantiation of subclasses in

`__new__`

.

Functions:

removed aliases of plotting functions.

Added complex-related plotting functions:

`plot_complex`

now plots the absolute value of a function colored by its argument.`plot_real_imag`

: plot the real and imaginary parts.`plot_complex_list`

: plot list of complex points.`plot_complex_vector`

: plot the vector field [re(f(z)), im(f(z))] of a complex function f.

`plotgrid`

is now fully functioning.added

`plot_list`

to visualize lists of numerical data.added

`sum_bound`

keyword argument to`plot`

: now it is possible to plot summations.removed

`process_piecewise`

keyword argument from`plot`

. Now,`plot`

is unable to correctly display`Piecewise`

expressions and their discontinuities.added

`plot_piecewise`

to correctly visualize`Piecewise`

expressions and their discontinuities.added

`is_point`

and`is_filled`

keyword arguments to`plot`

and`plot_list`

in order to visualize filled/empty points.replaced

`fill`

keyword argument with`is_filled`

inside`plot_geometry`

.`iplot`

:implemented addition between instances of

`InteractivePlot`

and`Plot`

.fixed bug with

`MatplotlibBackend`

in which the figure would show up twice.

Deprecation of

`smart_plot`

.`plot_parametric`

and`plot3d_parametric_line`

: the colorbar now shows the name of the parameter, not the name of the expression.

Backends:

`Plot`

:improved support for addition between instances of

`Plot`

.improved instantiation of child classes in

`__new__`

method.removed

`_kwargs`

instance attribute.

`MatplotlibBackend`

:`fig`

attribute now returns only the figure. The axes can be retrieved from its figure.Dropped support for

`jupyterthemes`

.Fix bug in which the figure would show up twice on Jupyter Notebook.

Added colorbar when plotting only 2D streamlines.

`PlotlyBackend`

:removed the

`wireframe`

keyword argument and dropped support for 3D wireframes.dropped support for

`plot_implicit`

.

BokehBackend:

add update_event keyword argument to enable/disable auto-update on panning for line plots.

dropped support for

`plot_implicit`

.

K3DBackend:

fixed bug with

`zlim`

.

All backends:

Generates numerical data and add it to the figure only when

`show()`

or`fig`

are called.`colorloop`

,`colormaps`

class attributes are now empty lists. User can set them to use custom coloring. Default coloring is implemented inside`__init__`

method of each backend.

Performance:

Improved module’s load time by replacing from sympy import somethig with from sympy.module import somethig.

Improved module’s load time by loading backend’s dependencies not at the beginning of the module, but only when they are required.

Default settings:

Change backend’s themes to light themes.

Added options to show grid and minor grid on bokeh, plotly and matplotlib.

Added interactive section and the use_latex option.

Added

`update_event`

to bokeh.

Documentation:

Improved examples in docstring of plotting functions.

Removed tutorials from the Tutorials section as they slowed down the pages.

Improved organization.